Radar مستندات و آموزشDocs and tutorials ورودSign in

ثبت سفارش از روی چارتPlace an order from the chart

ریسک را انتخاب کنید، حد ضرر و حد سود را بکشید و حجم را اکسپرت حساب کند.Pick your risk, drag the stop and target, and let the expert work out the size.

اکسپرت متاتریدرThe MetaTrader expert آموزش ویدیوییVideo guide 2 دقیقه خواندن2 min read

هیچ دکمه‌ای روی پنل مستقیم سفارش نمی‌فرستد. Buy، Sell، Pend. Buy و Pend. Sell فقط ویرایشگر روی چارت را آماده می‌کنند و سفارش وقتی می‌رود که خودتان Set را بزنید.

۱. ریسک را انتخاب کنید

در ردیف Risk تب Trade سه حالت هست:

  • %: درصدی از موجودی را به خطر می‌اندازید.
  • $: مبلغ ثابتی را به خطر می‌اندازید.
  • Lot: حجم ثابت.

در دو حالت اول، حجم از فاصله‌ی حد ضرر حساب می‌شود. هرچه حد ضرر را دورتر ببرید حجم کمتر می‌شود و ریسک همان می‌ماند.

۲. ویرایشگر را باز کنید

یکی از دکمه‌های Buy یا Sell را بزنید. سه خط و دو ناحیه‌ی رنگی نسبت ریسک به سود روی چارت می‌آید و دکمه روشن می‌ماند.

  • خط SL قرمز و خط TP سبز است. نوار پهن هر کدام را بگیرید و بکشید، نه خط باریکش را.
  • روی هر نوار قیمت، مبلغ، درصد موجودی و تعداد پوینت زنده نوشته می‌شود. نوار میانی حجم و نسبت R:R را نشان می‌دهد.
  • در سفارش بازار، خط ورود روی قیمت لحظه‌ای قفل است. در سفارش معلق، خط ورود هم قابل کشیدن است: پایین‌تر از بازار لیمیت و بالاتر استاپ می‌شود (برای فروش برعکس) و نام دقیق نوع سفارش نوشته می‌شود.

۳. ارسال

روی Set بزنید، یا روی Set > کنار خود چارت. علامت ✕ روی چارت، یا فشار دوباره‌ی همان دکمه‌ی پنل، آن را لغو می‌کند.

اگر حجم و ریسک جور نباشند یک پنجره‌ی بله یا خیر می‌پرسد: حد ضرر نگذاشته‌اید، حجم ثابتی بیش از حد مجاز ریسک دارد، یا کمترین حجم بروکر از بودجه‌ی ریسکتان بزرگ‌تر است. مشکل را می‌گوید و می‌گذارد با اطلاع خودتان بفرستید.

سفارش معلق

سفارش معلق در فهرست Pending Orders زیر معامله‌های باز می‌ماند تا فیل شود. Cancel وقتی سفارش هنوز در حال کشیدن است ویرایشگر را کنار می‌گذارد، و وقتی سفارشی نزد بروکر منتظر است همان را پاک می‌کند. معامله‌ی باز را هیچ‌وقت نمی‌بندد.

پیام‌های بالای چارت

هر کار با یک بنر گزارش می‌شود: سبز یعنی انجام شد (مثلاً «BUY 0.05 sent»)، قرمز یعنی نشد و دلیلش، مثل کد و متن رد بروکر. اگر خط ترمینال با بروکر قطع شود، بنری یک بار خبر می‌دهد و هر چه ارسال‌نشده مانده در صف می‌ماند و بعد از وصل شدن به‌ترتیب می‌رود.

No button on the panel sends an order directly. Buy, Sell, Pend. Buy and Pend. Sell only ready the editor on the chart, and the order goes when you press Set.

1. Pick your risk

The Risk row of the Trade tab has three modes:

  • %: risk a share of your balance.
  • $: risk a fixed amount.
  • Lot: a fixed size.

In the first two, the size comes from the stop distance. Move the stop further away and the size gets smaller while the risk stays the same.

2. Open the editor

Press Buy or Sell. Three lines and two shaded risk-to-reward zones appear on the chart and the button stays lit.

  • The SL bar is red and the TP bar is green. Grab the wide bar of each and drag it, not the thin line.
  • Each bar shows live price, money, percent of balance and points. The middle row shows the size and the R:R.
  • For a market order the entry line is locked to the current price. For a pending order the entry line can be dragged too: below the market is a limit and above is a stop (reversed for sells), and the exact order type is named.

3. Send

Press Set, or Set > on the chart itself. The ✕ on the chart, or pressing the same panel button again, cancels.

If size and risk do not add up, a yes-or-no dialog asks first: no stop loss, a fixed lot that risks more than allowed, or a broker minimum bigger than your risk budget. It names the problem and lets you send anyway.

Pending orders

A pending order waits in the Pending Orders list under your open trades until it fills. Cancel puts the editor away while you are still drawing, and deletes the order once one is resting with the broker. It never closes an open trade.

The banners on the chart

Every action reports itself as a banner: green means it worked (for example "BUY 0.05 sent"), red means it did not, with the reason, such as the broker's rejection. If the terminal loses its line to the broker, a banner says so once, and anything not yet sent is queued and goes out in order once it is back.